Log debarker machine

log debarker machine

Log debarker machine introduction

The log debarker machine belongs to one of the series of wood processing machinery products, wood chipper, wood crusher ,wood pellet mill,etc. It is used for peeling off the bark of wood. Wood debarker machine is mainly composed of feeding mechanism, discharging mechanism, cutter head, transmission system, underframe and so on.

Application

The log debarker machine is suitable for large, medium and small paper plant, pulp plant, wood chip plant, wood processing plants, wood pellet plant, forest mills, wood storage yards, wood-based panel factories (such as plywood plant, medium density fiberboard plant, etc.). The log debark machine is a unique force produced by the rotor with peeling teeth.

Log debarker machine principle

  1. Log debarkermachine adopts open silo, which can feed from one end and discharge from the other end of the assembly line operation, which overcomes the shortcomings of the existing drum type debarkermachine power failure feed, discharge, type working mode, and high working efficiency.
  2. Because of the impact of tooth teeth on the wood segment, the wood debarkermachine not only makes the circulation movement of the wood segment in the housing, but also rotates around itself, so the efficiency of the peeling machine is high, and the difficult tree species such as eucalyptus and poplar have better peeling effect, and the than 95%.
  3. Log debarkermachine has strong adaptability to wood, it can peel wood segments with different tree species, diameter, length and shape of wood peeling machine manufacturer. because the wood segments do rotary motion and irregular runout, the concave part of curved wood segments can also be in good contact with peeling teeth. Therefore, the stripping static rate of bending logs is much higher than that of other roller types.
  4. Because the huge housing is fixed, so the energy consumption is small, the failure rate is low, the maintenance work is small, the vibration and noise is much lower than the drum debarkermachine, the log debarkermachine can be produced on the ground, even without the need to install the base, easy to use

Log debarker machine specification and parameter

Equipment Name: Rotor Single Roller Log Debarker Machine

1.equipment Specification: PLT-Z600/Z700 Type

Mainframe Power :7.5-11/11-15 KW-6

Auxiliary Power :3 KW Inner Bark Conveyor

Feed form: optional loader or transport platform side feed

Discharge form: open continuous discharge

Electronic control form: electronic control cabinet switch start control

Material slot size :6000/7000*1500*900 mm.

Timber length :1000-2000 mm

Feed bend: maximum not exceeding 5-8%

Diameter range :50-300 mm too long material can be cut within 2.5 meters before processing

Height of tree joints: maximum not exceeding 100 mm

Netting rate :85-90% and above

 Yield :8-10/12 m³ per hour( different material diameter)

Size :7500/8500*1800*1900 mm.

2.Equipment Specification: PLT-Z800/Z900 Type

Mainframe power :15-18.5 KW-6

Auxiliary power :4 KW inner bark conveyor

Feed form: optional loader or transport platform side feed

 Discharge form: open continuous discharge

Electronic control form: electronic control cabinet switch start control

Material slot size :8000/9000*1600*1000 mm.

 Timber length :1000-2500 mm

 Feed bend: maximum not exceeding 5-8%

Diameter range :50-300 mm over length material can be cut within 3 meters before processing

Height of tree joints: maximum not exceeding 100 mm

netting rate :85-90% and above

Yield:12-15 m³/h( Material diameter specifications vary)

Size :9500/10500*2000*2100 mm.

Equipment total weight :5800/6800 KG

3.Equipment Specification: PLT-Z1000/Z1200 Type

Mainframe Power :22-30 KW-6

Auxiliary Power :5.5 KW Inside Bark Conveyor

 Feed form: optional loader or transport platform side feed and discharge form: open continuous discharge

Electronic control form: electronic control cabinet switch start control

Material slot size :10000*1600*1000 mm.

Timber length :1000-3500 mm

 Feed bend: maximum not exceeding 5-8%

Diameter range :50-300 mm too long material can be cut within 4 meters before processing

Height of tree joints: maximum not exceeding 100 mm

Netting rate :85-90% and above

Yield :15-20 m³/h( Material diameter specifications vary)

 Size :11500*2000*2100 mm.

Equipment total weight :7600/8800 KG

Equipment Name: Rotor Double Roller Log Debarker Machine

1.Equipment Specification: PLT-Z400-2 Type

Main engine power :11 KW-6*2

Auxiliary power :3 KW inner bark conveyor

Feed form: optional loader or transport platform side feed

Discharge form: open discharge baffle control

 Electronic control form: electronic control cabinet switch start control

Material slot size :4000*1900*1500 mm.

Timber length :1000-3000 mm

Feed bend: maximum not exceeding 5-8%

Diameter range :50-300 mm too long material can be cut off about 3 meters before processing

 Height of tree joints: maximum not exceeding 100 mm

Netting rate :85-90% and above

Yield :4-6 m³/h( different material diameter)

Size :5000*2000*2100 mm

2.Equipment Specification: PLT-Z600-2 Type

Mainframe power :15 KW-6*2

Auxiliary power :3 KW inner bark conveyor

Feed form: optional loader or transport platform side feed

Discharge form: open discharge baffle control

Electronic control form: electronic control cabinet switch start control

Material slot size :6000*1900*1500 mm.

Timber length :1000-4000 mm

Feed bend: maximum not exceeding 5-8%

Diameter range :50-300 mm too long material can be cut off about 4 meters before processing

Height of tree joints: maximum not exceeding 100 mm

Netting rate :85-90% and above

Yield :8-10 m³/h( different material diameter)

 Size :7000*2000*2100 mm

Pictures and details show

log debarker machine

small log debarker machine

small log debarker machine

debarker machine gearbox

large debarker machine

large log debarker machine

log debarker machine conveyor

debarker machine conveyor

Log debarker machine and wood chipper video

For detail and price of log debarker machine, please refer to:

Email: palet@biopelletmachines.com 

Mobile: +86-13406817961

Note: Please feel free to give your inquiry in the form below. We will reply to you with details within 24 hours!

Close Menu