3T/H sawdust dryer in Iran
After the sawdust raw materials are processed by the screening system, they are sent to the drying equipment through the belt conveyor. They are repeatedly picked up and scattered by the scraper on the inner wall of the drum. After being broken up by the crushing device, the materials are fully in contact with the high-temperature medium with negative pressure to complete the heat and mass transfer process.
Due to the inclination of the drum and the effect of the induced wind, the materials move slowly from the feed end, and are discharged by the discharge spiral after drying. The exhaust gas is dedusted by the dust collector and discharged into the atmosphere.
This sawdust drying production line installed in Iran has a compact structure and occupies a small area. The daily output can reach 80 tons
On-site details display
Equipment model and parameters
| On-site details display | PLT2010 | PLT 2210 | PLT2510 | PLT2512 | PLT2912 |
| Daily Output（t/d） | 63.5-144.5 | 67.5-154.0 | 83.5-193.0 | 100-227.0 | 120.0-268.0 |
| Evaporation capacity（t/h） | 1.85 | 1.976 | 2.427 | 2.912 | 3.432 |
| Raw material moisture（%） | 35~60% | 35~60% | 35~60% | 35~60% | 35~60% |
| Dry material moisture（%） | 12~15% | 12~15% | 12~15% | 12~15% | 12~15% |
| Drying temperature（℃） | 270℃±3 | 270℃±3 | 270℃±3 | 270℃±3 | 270℃±3 |
| Total machine power（kw） | 78 | 85 | 110 | 125 | 135 |
| Gross weight(kg) | 25000 | 27000 | 35000 | 38000 | 43500 |
| Area（m2） | 8m×18m | 10m×18m | 10m×18m | 10m×20m | 10m×22m |
Process flow chart
Sawdust dryer system structure
1. Hot air furnace
2. Single or multi-layer drum drying equipment
3. Air duct
4. Air flow or cyclone dryer
5. Cyclone dust collector
6. Bag dust collector
7. Fan
8. Control cabinet
9. Storage silo
10. Feed belt
11. Discharge belt
12. Dehydration, molding, cooling optional